The NOVO Tripod / Monopod Spiked Feet set is a replacement set of 3 stainless-steel spikes which attach to the Novo Explora range of tripods and monopods, and are also universally suitable for tripods with 3/8″ inch thread feet attachments.
The spiked feet provide reliable footing on soft ground to photographers and videographers.
These Novo standard spiked feet, are a direct replacement / spare for the ones attached to the range of Explora tripods and monopods, including the Novo T5, T10 and T20 series of tripods, and MP10 and MP20 monopods. They are 30mm long spike feet are made from the high quality stainless steel, weigh 18g each and attach via a 3/8" screw thread.
NOTE: Most of the Novo range of tripods and monopods already have spiked feet - just pull off rubber feet to reveal the spikes on these tripods. These spikes are replacements for lost or worn spikes.
They are fitted by simply unscrewing the existing spiked foot and screwing the new foot on. There is a hole for helping to tightly screw in/ out the spiked foot. By putting a metal bar (such as a strong old small screwdriver shaft or hex key etc) through the hole enables good leverage to aid replacement or tightening.
|Suitable for NOVO models:||most models, including T5, T10, T20, and MP10, MP20|
|Universally suitable for:||tripods with 3/8″ thread feet attachment|
|Attachment||3/8″ screw thread|
|Length||30mm (spike) 40mm (including screw)|
|Weight||approx 18g (each)|
You need to log in to ask a question.